Description

Daniel Smith Pearl White Watercolour Ground

DANIEL SMITH Pearl White Watercolour Ground allows you to paint watercolors on any surface and gives you a beautiful, pearlescent surface to paint on! The watercolor ground makes a white pearlescent paintable area when applied to a painting surface. Because it is semi-transparent, it allows the color or pattern of the surface to show slightly through the pearlescent sheen. Your transparent and semi-transparent watercolors will have a slight pearlescent effect when painted over this Pearlescent White Ground. You can paint over an entire surface with the ground or only in areas that you wish to add pearlescent effects. Perhaps using the other DANIEL SMITH Watercolor Grounds in the other areas if you are not applying it onto watercolor paper.

Size: 4 oz

Instructions:

Apply the Ground straight from the container using a foam brush or synthetic brush for a more textured finish. For the smoothest surface, apply very thin coats with foam brush. Allow to dry thoroughly between coats.

Curing: To allow the ground to attain the correct degree of absorption, let it dry and cure for at least 24 hours (depending on humidity) after the last coat. As with all the DANIEL SMITH Watercolor Grounds, this Ground provides a surface to paint with your watercolors on almost any substrate, and is mixed media friendly. The DANIEL SMITH Pearlescent White Ground has excellent light-fastness, and is archival. It gives you more creative ways and surfaces to paint with watercolors!

Think of all the Creative Possibilities with this new Pearl White Watercolor Ground from DANIEL SMITH!