Description
Pebeo Setacolor Cuir Leather Markers
Pébéo is breaking new ground with this range of 10 colours of paint markers especially designed for leather and synthetic leather. With an extra fine tip, you can easily work on customizing leather and leatherette surfaces even when you are new to the activity. These markers are great for drawing, writing and working on details or flat areas without streaks. Use them alone or in combination with the Setacolor Cuir Leather paints. Marker shades are identical to those in the 45 ml bottles.
Select from Chart Below
Read more
Details:
- Size: Extra-Fine Tip
- Finish: Satin/Matt
Setacolor Cuir Leather paint is a complete range of acrylic paint for customizing and repairing leather as well as imitation leather. This unique range of fabric paint markers with an extra-fine tip, features shades identical to those in Setacolor Leather bottles. For fluorescent shades, it is best to apply to light coloured surfaces.
It is essential to shake the marker well before use. The tip is primed very quickly, so don’t press too hard or for too long, since the colour may leak out of the tip. Put the cap back on the marker after use to prevent the tip from drying out. Store flat.
A bag of 3 spare tips is available. If the tip dries out or becomes clogged, you can easily replace it. Remove the white nib holder, then grip the white foam underneath the metal tip with two fingers to remove only the tip. Replace with a new metal tip and screw the nib holder back on.
Features:
- A unique range of markers with an extra-fine tip, shades identical to those seen on the bottle
- Acrylic paint specifically designed for leather and synthetic leather
- Resistance to scratches and rubbing*
- Bright colours
- Optimum coverage
- A dedicated range auxiliaries to prepare, create and protect leather or synthetic leather
*Approved following a test protocol based on more than 100,000 rubbing contacts.
To ensure best results, use the Setacolor Leather Primer-Degreaser to prepare the surface before applying.
Specifications:
- Drying Time: Minimum 15 minutes between coats.
- Protection: Use the Setacolor Leather matt-satin or gloss varnish on the work after leaving it to dry for 24 hours. Tip: You can achieve a semi-gloss finish by mixing the matt-satin and gloss varnish together. For a semi-gloss/satin finish, mix 3 parts gloss varnish to 1 part matt-satin varnish.
- Cleaning: Clean up with water.
- Storage: Protect from frost and heat. (may not be able to be shipped in winter months)
FAQs:
- Why and how do I apply the Preparer-degreaser auxiliary?
It removes the protective varnish that covers the leather or the synthetic leather, and degreases it. This will enable you to clean the surface thoroughly in order to obtain optimal adhesion of the colours afterwards. To apply it, soak an absorbent paper towel or cloth with the degreasing agent and rub the leather surface. It is advisable to work outdoors or in a well ventilated area.
- Why is it necessary to shake the markers before use?
This helps to homogenize the product before use to obtain a more uniform shade and finish.
Check out Pebeo on Youtube for product info and inspiration!
