Daniel Smith 4 oz Watercolour Ground Pearl White
DANIEL SMITH Pearlescent White Watercolor Ground allows you to paint watercolors on any surface and gives you a beautiful, pearlescent surface to paint on! The ground makes a white pearlescent paintable area when applied to a white surface, and because it is semi-transparent, it allows the color and/or pattern of the surface it is applied onto to show slightly through the pearlescent sheen. Your transparent and semi-transparent watercolors will have a slight pearlescence effect when painted over the Pearlescent White Ground. You can paint over an entire surface with the ground or only in areas that you wish to add pearlescent effects, perhaps using the other DANIEL SMITH Watercolor Grounds in the other areas if you are not applying it onto watercolor paper.
Apply the Watercolor Ground straight from the container using a foam brush or a synthetic brush for a more textured finish. For the smoothest surface, apply very thin coats with foam brush, allow to dry thoroughly between coats. Curing: to allow the watercolor ground to attain the correct degree of absorption, let the watercolor ground dry and cure for at least 24 hours (depending on humidity) after the last coat. As with all the DANIEL SMITH Watercolor Grounds, our Pearlescent White Ground provides a surface to paint with your watercolors on most any substrate, and it is mixed media friendly. The DANIEL SMITH Pearlescent White Ground has an excellent light-fastness, is archival and gives you more creative ways and surfaces to paint with watercolors!
Think of all the Creative Possibilities with this new Pearlescent Watercolor Ground from DANIEL SMITH!